Centrifugal Industrial Extraction is a method of extraction that is used in industrial and manufacturing environments to remove oil mist. This method is very effective and mainly uses high quality centrifugal fans.

Typically a perforated drum is used, being perforated and having vanes that are able to rotate at a very high speed. Once the oil mist is slowly drawn in the unit, it is able to hit the vanes at a very high velocity. Synthetic pads play a major role in collecting solid particles.

The Centrifugal Industrial Extraction process uses centrifugal force. Centrifugal force is able to provide force to the oil and it is pushed to the outer case of the unit. The oil is then able to drain back to the machine where it is collected or reused. The clean air is usually collected and pushed back out into the environment.

The process of industrial extraction of particulates plays a major role in ensuring that air cleanliness levels are maintained reducing the likelihood of respiratory diseases caused by breathing in polluted air.

In the UK, all the industrial workplaces should ensure that all their employees work in environments that are free from any health hazards like contaminated air.

Example of substances that are removed through the process of Centrifugal Industrial Extraction
– Fumes
– Dust
– Vapours
– Gases
– Fibres
– Mist

All these substances directly affect the air in most workplaces and mainly contaminate it. This means that most workplaces should try to use the centrifugal industrial process to try and get rid of these contaminants present in the air.

It is worth noting down that these centrifuge fans can actually be able to operate effectively in environments that have both high pressure and extreme temperatures.

The diameter of the wall units mainly ranges between 500 to 1000mm. The diameter of the roof units typically ranges between 630 to 1400mm. The capacity of these units is approximately 30 metres cubed for every second that air flows in. It is worth noting down that this particular extraction process can actually be customized to ensure that it meets all your requirements.

Centrifugal Industrial Extraction is a method that can also be used in the continuous extraction of a particular liquid phase into another one.

Chambers in This Form of Extraction
– There is a mixing chamber that mainly comprises two phases that are well mixed. The solutes that are going to be extracted are mainly transferred in this chamber. An emulsion is also formed when the two phases are thoroughly mixed.
– There is also a decanting chamber where centrifugal force is mainly used to try and separate the two fluids that are well mixed.

For this type of extraction to take place, you should always ensure that you get high quality centrifugal fans from good manufacturers. This type of industrial extraction is very important because it helps in maintaining clean and fresh air in most workplaces. This plays a major role in safeguarding the health of all individuals in your workplace.